Click on the image to check the artwork
This nema 17 stepper motor with step angle 1.8deg and size 42x42x34mm. It has 4 wires, rated current 0.4A, with holding torque 0.2Nm (2.83oz.in).
Specifications
| Part Number | DT42HS34-0402 |
Step Angle(deg.) |
1.8 |
Body Length(mm) |
34 |
Rated Current(A) |
0.4 |
Phase Resistance(ohm) |
3.0 |
Phase Inductance(mH) |
1.8 |
Holding Torque(Nm) |
0.2 |
Rotor Intertia(g.cm²) |
34 |
No. Of Leads |
4 |
Weight(g) |
220 |
Shaft Diameter(mm) |
5 |
Wiring Connection
Motor Drawing
http://www.dtdmotion.com/